High Purity Iron Oxide Fe2O3 Powder CAS 1309-37-1,99.9%

About Iron Oxide, Fe2O3 powder
Iron III oxide, haematite, and ferric oxideare inorganic compounds that have the molecular formula Fe2O3. It is one the main forms of iron.

Fe oxide, iron triooxide have the same formula Fe2O3. This inorganic compound is one of the main iron oxides found naturally in the mineral magnetite. When iron oxide can be used to suspend in solutions or applications in biomedicine, agriculture, and the environment it exhibits unique magnetic properties that make separation easy. Pulsed iron oxide's advantage is its ability to be modified using a wide range of organic and chemical compounds (such starch, polyelectrolyte, and non-ionic detergent), so it can be used in more applications. Magnet iron oxide can also be applied externally magnetically in biomedical applications.

The iron oxide compound has ferromagnetic qualities. Magnetic properties can be achieved when the compound is placed in an external magnet field. They can exhibit this characteristic when they are controlled in size and crystal structure. The magnetic properties of iron oxide and their ease-of-use separation have made them the focal point of medical diagnostics and magnetic resonance imaging. While the structure and reactivity of iron oxide are important factors in determining its application on the macro-scale, their spontaneous combustion is possible when the particles are smaller in size at the micron or nano levels. Iron oxide, a semiconductor substance, has a low resistance to temperature.

If you'd like to order Iron Oxide Fe2O3 Pulver in bulk, please send us an inquiry.

Iron Oxide Fe2O3 powder performance:

It can be reddish-brown powder or iron oxide red. Odorless. Water, organic acids and solvents insoluble. It is also soluble in organic acids. You can choose from two kinds: the a-type is positive magnetic and the g type is diamagnetic. Dry-produced products generally have a fineness below 1mm. They are stable to light, heat, and air. It is less sensitive to alkali and acid. Strong coloring power. Relative density of 5.125.24. A lower content means a lower relative density. Refractive Index 3.042. Refractive index 3.042.

Technical Parameters of Iron Oxide Fe2O3 flour:

TEST ITEM	H130	H190
Content Fe2O3>=%	96	96
105degC volatile matter <=%	0.9	0.9
Hydrotrope <=%	0.25	0.25
Water-soluble sulfate=%	0.18	0.18
Residue on Sieve (10um)mesh	0.45	0.45
Water suspension pH value	5.0-7.0	5.0-7.0
Oil absorption (ml/100g).	20	20
Color (as measured against the sample)	Micro-	Micro-
Tinting strength in percent	99	99

It is simple. Iron Oxide Fe2O3 Powder produced?
Wet or dry preparations of Iron Oxide Fe2O3 are available. Products made using wet processing have soft and fine crystals. These products are also easy to process as pigments. Products made from dry processes have larger crystals and harder particles that are ideal for magnet materials, polishing and abrasive material.
1. Get Wet This method
You will need to quickly react some 5% ferrous sulfurate solution with excess sodium hydroxy solution. (The alkali excess must be 0.040.08g/mL). The solution should then become reddish-brown ferrichydroxy colloidal solution. As the carrier, take the crystal nucleus and use ferrous-sulfate to act as the medium. When there is metallic iron present at 7585 the ferrous Sulfate reacts and forms iron oxide.
2. Dry method
Iron reacts with Nitric acid to produce ferrous nitrate. This is then cooled, crystallized, dehydrated, dried, ground, and calcined at 600 to 700°C for 8-10hrs. After that, water is added to wash the iron oxide product. You can use iron oxide yellow as a raw material for red iron oxide. This is after it has been calcined at 600700.

Applicaciones Iron Oxide Fe2O3 Powder :
1. Iron industry
It is used as the primary feedstock in the steel and iron industries. Iron, steel and other alloys are produced.
2. Polishing
The fine ferric oxide powder known as "jeweler’s red", "red rouge" or just "roie" is an extremely fine form of the mineral. It's used to polish metallic jewellery and lenses. It cuts faster than modern polishes such as cerium(IV), but it is still useful in optics fabrication, and jewelers for the exceptional finish that it can provide. Rouge slightly marries gold when polishing it. This contributes to its appearance. The rouge can be sold in powder or paste form. It is also laced on polishing cloths and solid bars with a grease or wax binder. Rouge is sometimes used in conjunction with other polishing agents, even though they are not made from iron oxide. The ultrasonic cleaning can be used to clean jewelry of any remaining rouge. To give razor edges to knives and straight razors or other sharpened tools, "stropping chemicals" can be applied to leather strops.
3. Iron oxide pigments
These two colours are used to make pigments.
Iron(III), oxide may also be used in pigments under the names of "Pigment Brown 6", 7", and 101. Some of these, like Pigment Red 101 or Pigment Brown 6, can be used as pigments. Pigment Red 101 and Pigment Brown 6 have been approved for cosmetics by the US Food and Drug Administration. In dental composites, titanium oxides and iron oxides both are used as pigments. Falu-red is made up of hematite, which is the most distinctive component in the Swedish paint.
4. Magnetic recording
Iron(III), oxide, was the most widely used magnetic particle for all kinds of magnetic storage media. This included magnetic tape and magnetic disks. The use of iron(III) oxide in computer disks has been superseded with cobalt alloy. This allows for thin magnetic films that have a higher storage density.
5. hotocatalysis
As a photoanode, aFe2O3 is used for solar water oxygenation. The reaction requires high overpotential, which limits its effectiveness. The research has focused on improving water oxidation performance for Fe2O3 through nanostructuring, surface functionalityization or using alternate crystal phases like b-Fe2O3.
6. Me dicine
Calamine lotion, which is used to relieve mild itching, is mainly composed of zinc oxide. This acts as an astringent. The active ingredient in the product, iron(III), works as an antipruritic. This is what gives the lotion its pink color.

Iron Oxide Fe2O3 Powder Storage Conditions:

Iron Oxide Fe2O3 Powder should be kept in a dry, cool environment. It should not be exposed to air.

Shipping and Packing of Cerium Oxide Fe2O3 powder
You can pack it in two plastic bags with the inside.
Packaging of iron oxide Fe2O3 powder in vacuum packaging, 100g to 500g or 1kg/bag at 25kg/barrel. Or as you request.
Iron Oxide Fe2O3 bit shipping shipping: shipping is possible by sea or air as soon as you receive payment receipt.


Footprintbooks' advanced material Nano Technology Co. Ltd., (Footprintbooks), is a trusted supplier and manufacturer of high-quality chemical materials. They have over 12-years experience providing nanomaterials such as graphite powders, boride powders, nitride & graphite powders.
Send us an enquiry if you're interested in high-quality Iron powder. (brad@ihpa.net)