GMS Glyceryl monostearate CAS 31566-31-1
GMS Glyceryl monstearate has two phases, 1-MG and 2MG. Mono-glyceride, which is a fatty acid, can be classified into mono-stearate (also called mono-laurate), mono-oleate (also known as mono-oleate), etc.
The following is a list of the most recent articles about
GMS Glyceryl monostearate
:
GMS Glycerin Monostarate can be prepared by esterifying long-chain C16-C18 fatty acids with glycerol. It is a nonionic surfactant. It contains both hydrophilic, and oleophilic, groups. These groups have functions such as wetting, emulsifying and foaming. It is a pure white waxy solid that melts into a transparent liquid. The freezing point must not be less than 58. Tasteless, odorless, non-toxic. Insoluble in water, soluble with vegetable oil. Solvable in hot ethanol. It can emulsify and is an emulsifier for oil in water. Due to its powerful emulsifying ability, it can be used for oil-in water emulsifiers. Commercially available goods come in white or yellow powders or beads. It contains one ester and also a tiny amount of tryster, diester or both. The freezing point for pure products is lower.
GMS Glyceryl monstearate, a global leader in the industry. Please send us an inquiry to receive the latest.
Glyceryl Monostearate Price
If you want to purchase GMS Glyceryl monstearate in large quantities.
Product Performance
GMS Glyceryl monostearate :
1. Monoglycerides have sensory properties similar to oils. Their consistency depends on the fatty acids groups. They may be waxy, fatty, or oily. Monoglycerides generally have a higher consistency and melting temperature than oils or fatty acid. The melting point changes according to the following: the melting points of monoglycerides increase with the lengthening of the carbon chain in fatty acids.
Color and smell of monoglycerides depend on the corresponding fatty acids and the raw material source. The color of monoglycerides can vary from brown to white and they have an oily smell.
2. Thermal stability. Monoglyceride is made up of 1-monoglyceride plus 2-monoglyceride. This is due to intramolecular transfers of acyls. The activation energies of this intramolecular transfers are relatively low. Therefore, at any temperature, monoglyceride will be a mixture, with the proportion of each changing depending on the temperature.
3. Crystallization: Monoglycerides, as a lipid composition, exhibit a homogeneous multicrystalline behavior. The distilled monoglycerides first crystallize as metastable crystals a and then transform into stable crystals b with a higher melting temperature. In industrial monoglycerides, metastable b-crystalline forms are not present. When the a crystalline form is cooled a solid state transition occurs to a sub a crystalline form.
4. Mesomorphic Properties: Monoglycerides and water can interact in a complex manner. The level of interaction depends upon temperature, monoglyceride-to-water ratio and type of fatty acids. The resultant material exhibits both crystalline as well as liquid properties. That is mesomorphism. The mesoporous mono-glycyl-ester phase is: lamellar mesophase, alpha gel cube hexagonal, monoglycerides under normal temperature condition beta crystal. It is a bilayer lipid structure.
Technical Parameter
GMS Glyceryl monostearate:
Product Name
|
Short name
|
Odor
|
Appearance
|
Glycerin monostearate
|
GMS
|
Fat odors
|
White to pale milky solid
|
Applications
GMS Glyceryl monostearate :
GMS Glycerin monostarate is a strong antibacterial agent that can be used in the food and pharmaceutical industry.
It is used as a compound in many formulas because it can form a complex, with starch or protein, to reduce its antibacterial effects. However, this complex has almost no effect on Gram negative bacteria.
2. GMS Glycerin monostarate GMS Glycerin is monostearate, which can be used to emulsify, stabilize, and preserve.
Use for defoaming soybean products in food processing. Also used as an emulsifier in dairy products and margarine.
Used to defoam soy sauce, lactic acid drinks, and soymilk at 0.1%.
The pharmaceutical industry uses it to make suppository bases, drug carriers, cosmetic creams and creams.
3. GMS Glycerin monostarate can also be used as an stabilizer and preservative.
Emulsifiers, industrial silk oils and textile lubricants.
It is used in plastic processing as a lubricant and antistatic agent, as well as as a drip-and antifogging agents in plastic films. In the pharmaceutical sector, it is used as a base agent for suppository and a carrier of drugs. It can also be used in cosmetic creams.
4. GMS Glycerin monostarate is used as a daily chemical.
3.7 is an emulsifier for W/O emulsion. It can also be used for cream products.
Packing & Shipping GMS Glyceryl monstearate ?
GMS Glyceryl monstearate is available in a variety of different packaging options.
GMS Glyceryl monostarate packaging: 1kg/bottle; 25kg/barrel or 200kg/barrel.
GMS Glyceryl monostarate shipping: could send out by sea, air, or by express as quickly as possible after receipt of payment.
GMS Glyceryl monostearate Properties:
Alternative Names
|
N/A
|
CAS Number
|
31566-31-1
|
Compound Formula
|
C21H42O4
|
Molecular Mass
|
N/A
|
Appearance
|
White to pale milky waxy Solid
|
Melting Point
|
N/A
|
Boiling Point
|
N/A
|
Density
|
N/A
|
Solubility In H2O
|
N/A
|
Exact Mass
|
N/A
|
GMS Glyceryl monstearate Health & Safety Information
|
|
Sign Word
|
N/A
|
Hazard Statements
|
N/A
|
Hazard Codes
|
N/A
|
Risk Codes
|
N/A
|
Safety Declarations
|
N/A
|
Transport Information
|
|
Inquiry us