High Purity Tungsten Disulfide WS2 Powder CAS 12138-09-9, 99.9%
Tungsten dioxide is its name. Formula: 247.97 Molecularweights W2. Furthermore, hexagonal packaging contains 99.9% pure
About
Tungsten Disulfide WS2:
Tungsten disulfide
You can find tungsten, sulfur or both in this product.
Tungsten disulfide chemical formula
It is
WS2
. It is part the Transition Metal Dihalides. Also known as Trend-Metal Dihalides, this material can also be called: This material is part of certain catalysts used for hydrodesulfurization and hydrodenitrogenation.
WS2 tungsten disulfide
The MoS2-derived model has a similar structure. MoS2 Coordinatsphere can be found in the Watoms. All of them are housed within the three-dimensional prism. In 1992, the prism was heated in order to make organic Nanotubes. Many WS2Crystals come in dark colours. Many have hexagonal patterns. Another benefit of WS2Crystals is their layer visibility. MoS2 is an alternative to WS2Crystal. Many thought oxygen ambient wouldn’t have any effect on WS2. Studies on single-layer, environment-dependent WS2 oxidation have revealed that the contrary is true. You can convert W2 quickly to pure, tungstenoxide by using photooxidation. Both indoors and outdoors, it can be achieved. When the sun absorbs this material, it happens. The photooxided material can be reduced to 1.88eV (560nm) using WS2. This is possible only with oxygen and water. You get sulfuric and/or tungsten acids. Similar results can also be observed with semiconductor transitional metal dihalides. Ambient was also used for testing dihalides. Hydrofluoric Acid is compatible with WS2, which can be taken as a mixture of Hydrofluoric Acid (nitric acid), and WS2. In oxygen rich areas, WS2 may turn to tungsten dioxide if heated. Once heated, however, WS2 can not melt. It will become tungsten dioxide. The melting point of WS2 at 1250oC will be 1250oC. Monolayers can also be removed with chemical exfoliation. By placing lithium into Hexane, you can create Li compounds using ultrasonics. There are several ways you can get rid of WS2, from chlorosulfonic to halide. Get the latest information from us. Make an enquiry
Tungsten disulfide
Prices
Get tungsten d if you wish to
Isulfide powder
Bulk buying is possible.
Tungsten Disulfide details:
Tungsten Dioxide particle sizes: FSSS=0.4 to 0.7 mm; FSSS=0.85-1.15 mm. 80nm
Tungsten Disulfide purity: 99.9%
W
|
S
|
Al
|
As
|
Cl
|
Cu
|
Fe
|
Ni
|
P
|
Si
|
O
|
74.12
|
25.82
|
0.001
|
0.002
|
0.03
|
0.002
|
0.005
|
0.002
|
0.002
|
0.003
|
0.002
|
It's simple.
Tungsten Disulfide WS2 produced?
1. Roasting decomposition method:
Stir the mixture once every three hours. Mixture should remain at room temperature for 3 hour when temperatures reach 57-60C. For 16 hours, the mixture should be at room temperature. This is created by reacting ammonium with hydrogen sulfuride gasses. Ammonium Tetrathiotungstate results. Ammonium Tetrathiotungstate is heatable to make tungstenoxide.
H2WO4+2NH3*H2O-(NH4)2WO4+2H2O
(NH4)2WO4+4H2S-(NH4)2WS4+4H2O
2(NH4)2WS4+3O2-2WS2+4NH3+2S+2SO2+H2O
2. Tungsten may also be known as liquid sulfur. To make WS2, you could change the color from red hot to green hot. You can combine tungsten and another sulfur to create WS2. Orthorhombic compounds may be created by reacting from 600pa to 606pa.
3. By heating the ammonium-tetrathiotungstate and decomposing it, under the condition that the air is isolated, the temperature increases from room to 700 to 1200. You must maintain the temperature at the same level for 24 hours to stop it from falling. It can reach temperatures of 30 to 110° Celsius an hour. When the room has been heated for at least 24 hours, temperatures can soar to 30 to 110 Celsius per hour.
Both thin and ultrafine tungstenoxide forms are also available. It's completely safe for the environment.
Applicaciones
Tungsten Disulfide WS2:
Tungsten disulfide
It's possible.
tungsten disulfide lubricant, tungsten disulfide grease.
Tungsten dioxide2W2 friction coefficient 0.03 This renders it more powerful than graphite(PTFE), graphite[MoS2],graphite[MoS2],graphite[MoS2],graphite[MoS2],graphite [MoS2], and graphite[MoS2], as well graphite[MoS2], graphite[MoS2], and graphite[MoS2], which makes it even better than graphite(MoS2],MoS2], MoS2],MoS2],MoS2], but not,MoS2], however,MoS2], or graphite[MoS2],MoS2], moS2],MoS2],MoS2],MoS2],MoS2],MoS2],MoS2],M2],MoS2],MoS2],MoS2],MoS2,MoS2 It is extremely lubricious. This powder can be used for electronic equipment, such as transistors and sensors. Combine this powder with alcohol.
The WS2 is useful for mold-making and extrusion.
It is possible to use lubricating oil without hydraulic oil. This oil can be mixed with grease- and synthetic oils. You can combine it with oils that are made of grease and synthetic oil to protect your surface. You can use this oil to protect surfaces from oil and grease. This oil is more resistant than many oils. It also has a stronger structure.
For parts less than one millimeter in diameter, tolerances may be granted.
You can use this to cook and maintain medical equipment.
By using ambient heat, the base materials can be replaced by WS2 The base material is not made unreliable, or instabile.
Utilising W2 and PVD with your PVC will improve durability.
Tungsten Disulfide Powder Storage Conditions:
The environment should be kept away from tungsten oxide. The disperssion of W2Pulp can occur if the material gets wet. It is important to handle WS2pulp with care
Packing and Shipping Tungsten Disulfide WS2 Pulver:
You can buy Tungsten dioxideW2 at different prices depending on your order.
Tungsten Disulfide Powder Packaging: vacuum packing 100g to500g at 1kg/bag @ 25,5kg/barrel. You have other options.
Tungsten diulfide Powder Shipping: After payment receipt received, can ship via sea or air.
Nanotechnology Co. Ltd. is able to supply high quality chemicals. Order graphiteboride.
What you need is high-quality, top-quality merchandise
tungsten disulfide powder
Questions are welcome. (
brad@ihpa.net
)
Tungsten Sulfide Properties
|
Titles
|
tungsten sulfide (WS2), tungsten disulphide,
tungsten(IV) sulfide, WS2 powder
|
|
12138-09-9
|
Combined Formula
|
WS2
|
Mobility
|
247.97
|
Appearance
|
Black powder or gray powder
|
Melting Point
|
1250 degC
|
Boiling Point
|
N/A
|
Density
|
7.5 g/cm3
|
Solubility
|
N/A
|
You
|
247.895074
|
|
|
|
|
Tungsten Sulfide Health & Safety Information
|
|
Alert
|
Hazard Statements
|
H315-H319-H335
|
Hazard Codes
|
Xi
|
Risk Codes
|
36/37/38
|
Privacy statement
|
26-37/39
|
Transport Information
|
N/A
|
Inquiry us